Based on the three-dimensional digital image correlation (3D-DIC) technique, the stereovision system has been applied to the improved triaxial apparatus to obtain 3D full-field deformation of the specimen during triaxial testing. Through the calibration process, the 3D-DIC technique can obtain the accurate specimen’s spatial displacement deformation. Meanwhile, a subpixel edge detection algorithm has been combined with 3D-DIC technique to calculate the radial strain and the volume strain of the specimen directly. Furthermore, a series of consolidated drained and undrained triaxial tests were carried out on Hainan (China) sand specimens and measured by the conventional and the image measurement methods. Compared to the results measured by the conventional method, the image measurement technique can obtain the more experimental data, such as the 3D displacement field of the whole specimen, the local strain distribution, and so on. The measurement results also show the conventional method would be disturbed by the end constraints in triaxial tests so that the strength of the soil would be overestimated. Meanwhile, the middle of the specimen would be selected to calculate the stress–strain relationship without the influence of the end constraints in the proposed method. Based on the image measurement results, the proposed method has the potential to be used in geotechnical tests for exploring the soil’s progressive failure behaviors, inhomogeneous deformation and mechanical characteristics.
A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study. 相似文献
Weathered rockfill materials, characterized by a mixture of soil matrix and rock aggregates, are widely distributed in mountainous areas. These soils are frequently used for subgrade or riprap in engineering practice, and the mobilized shear strength is crucial for analyzing the displacement and stability of these geo-structures. A series of direct shear tests are performed on a gap-graded soil with a full range of coarse fraction. The behavior of gap-graded soils is analyzed, and a simple model is proposed for the evolution of mobilized stress ratio during direct shearing process based on mixture theory. The change of inter-aggregate configuration is incorporated by introducing a structure variable which increases with coarse fraction and decreases approximately linearly with the overall horizontal shear strain in double logarithmic plot. It reasonably reflects a gradually transformation from a matrix-sustained structure into an aggregate-sustained one with the increase of coarse fraction. The model has four parameters, and at least two direct shear tests need to be done for the calibration. Validation of the model is done by using the test data in this work and those from the literature.
